We should pay attention to some issues when using FRP tanks, and avoid the following explanations when using them.

Description: FRP tanks are lightweight, high-strength, and corrosion-resistant non-metallic tanks. It is a glass fiber with resin based weight that is wound layer by layer on a rotating core mold according to the process requirements, and stone sand is evenly laid as a sand layer between the fibers at a distance. Its pipe wall structure is reasonable and advanced, which can fully utilize the role of materials, improve the rigidity while meeting the requirements of service strength, and ensure the stability and reliability of the product.

How to avoid prolonged exposure to sunlight and clean FRP tanks:

1、 FRP tanks should avoid prolonged exposure to sunlight:

The inspection of FRP tanks and devices is a comprehensive quality assurance system. This system requires that raw materials and auxiliary materials must have certification from the manufacturer and meet the quality and technical requirements of the product. Full inspection and spot check should be conducted before production. At the same time, physical and mechanical tests and inspections should be conducted on fiberglass storage tanks and devices and other products according to corresponding performance requirements.

1. Frequent cleaning and upkeep;

2. The use of FRP tanks is limited to the design conditions and the medium used cannot be changed arbitrarily; If the design conditions are met and the medium is changed, it should be cleaned thoroughly;

3. If any damage is found, it should be repaired in a timely manner;

4. Avoid long-term use in scorching sun and harsh environments.

5. Wax and polish on schedule, apply paint to maintain aesthetics and durability. Observe colors.

6. Avoid contact with sharp, hard objects.

2、 How to clean FRP tanks:

FRP tanks are lightweight, high-strength, and corrosion-resistant non-metallic tanks. It is a glass fiber with resin based weight that is wound layer by layer on a rotating core mold according to the process requirements, and stone sand is evenly laid as a sand layer between the fibers at a distance. Its pipe wall structure is reasonable and advanced, which can fully utilize the role of materials, improve the rigidity while meeting the requirements of service strength, and ensure the stability and reliability of the product.

Firstly, clean and polish the damaged area of the storage tank, select a material with the same performance as the storage tank material, design the thickness and area that needs to be reinforced according to the use pressure of the pipe, and then manually lay the reinforcement to meet the design requirements. The gel of the part to be reinforced is solidified, and the storage tank can be put into normal use.